Series 160E Ellipsoidal Tip Pitot Tube
Designed to Meet ISO Standard 3966
The Series 160E Ellipsoidal Tip Pitot Tube uses a precision crafted tip configuration, which allows air to pass smoothly with minimum turbulence for consistent, reliable readings. Sliding depth indicators grip firmly to ensure uniform insertion when measuring traverses across ducts. Total and static pressure taps are 1/4" (6 mm) and are permanently silver soldered to the connection block, making them leak-proof and durable.
Product Applications
- Monitor or control air velocity or air flow when combined with differential pressure gage, switch, or transmitter
Starting at $241.00
Features
- Designed to meet ISO standard 3966 commonly required in UK and Europe
- Ellipsoidal tip design for improved accuracy
- 304SS construction adds strength, resists corrosion
- Adjustable depth indicators for fast, consistent traverses
- Alignment indicator helps keep tip parallel to flow
Approvals
Questions
- Question
- How do you do traverse readings with a Pitot tube for air velocity and air flow readings?
- Answer
- Dwyer has a guide on how to calculate air velocity and air flow with Pitot Tubes including traverse readings located on our website at: Air Velocity Measurement
Write Your Own Review
| Model | Description | Availability* | Price | |
|---|---|---|---|---|
| A-156 | Flange mounting plate with 1/2" female NPT. | 1-3 days* |
$21.65 |
|
| A-158 | Split flange mounting. Can be added to any Dwyer® No. 160 standard pitot tube. Zinc plated steel. Gasket is pattern for mounting holes. Secure flange loosely to tube, adjust tube depth and tighten screws. Gasket of 1/16" Neoprene fits tightly around tube and against duct for leak-proof seal. Nuts, washers included. | 1-3 days* |
$19.10 |
|
| A-159 | Mounting gland. Versatile adapter slips on any Series 160, 5/16" standard pitot tube made after Dec. 1990. Two-part stainless steel fitting slides over tube and provides permanent, secure mounting. Where duct interior is accessible, use the washers and jam nut supplied. For blind applications or in thicker materials, use model A-156 flange mounting plate. Once tube is adjusted to proper depth and angle, tighten smaller hex bushing to lock position. Graphite bushing inside assures leak-proof seal even at higher temperatures. TFE bushing also available. Note: For full insertion with this fitting, order next longer pitot tube. A-159 mounting gland is used for both duct mounting and flange mounting. | 1-3 days* |
$37.40 |
|
| A-160-CASE | Hard plastic carrying case for pitot tubes up to 48" | 1-2 Weeks* |
$278.65 |
|
| A-532 | Air velocity calculator slide chart. | 1-3 days* |
$13.95 |
Related Products
