Series GFC Gas Mass Flow Controllers

Series GFC Gas Mass Flow Controllers

Series DFC Digital Flow Controller

Series DFC Digital Flow Controller

Series DMF Digital Mass Flow Controller

Programmable, RS485 Interface, Up To 500 psig, ±1% Accuracy

Program, record, analyze, and control flow rates of various gases with Series DMF Digital Mass Flow Controller. Controllers are designed with straight tube sensors with restrictor flow elements to ensure laminar gas flow for accurate and repeatable results. Series DMF are unaffected by temperature and pressure variations.

Controllers can be programmed for various control functions including flow set point, totalizer, stop totalizer, totalize from preset flow, stop and preset total, auto zero, and more. Auto zero feature utilizes an automatic balancing circuit that virtually eliminates drift of zero and span. In addition, Series DMF controllers have two dry contact closures to operate pumps, valves, or other process equipment.

The Series DMF features an auto tune function to optimize control response for a specific gas under actual process conditions. Self diagnostic tests are run at power up to ensure the controller is in optimum working condition. Calibration information for up to 10 gases and conversion factors for up to 256 different gases are stored in memory. High and low gas flow alarm limits are programmed via RS-485 interface. Software supports programmable flow modes, allowing execution of custom programming of up to ten steps.

Calibration Options are available, please contact Customer Service.

Starting at $3,212.00
Grouped product items
Model Description Availability* Qty Price
DMF-41402 Digital mass flow controller, range 0-20 sccm. Specified flow range is for an equivalent flow of nitrogen at 70┬°F (21┬°C) @ 760 mm Hg. 3-4 Weeks*
$3,212.00
DMF-41403 Digital mass flow controller, range 0-50 sccm. Specified flow range is for an equivalent flow of nitrogen at 70┬°F (21┬°C) @ 760 mm Hg. 7-8 Weeks*
$3,212.00
DMF-41404 Digital mass flow controller, range 0-100 sccm. Specified flow range is for an equivalent flow of nitrogen at 70┬°F (21┬°C) @ 760 mm Hg. 7-8 Weeks*
$3,212.00
DMF-41405 Digital mass flow controller, range 0-200 sccm. Specified flow range is for an equivalent flow of nitrogen at 70┬°F (21┬°C) @ 760 mm Hg. 7-8 Weeks*
$3,212.00
DMF-41406 Digital mass flow controller, range 0-500 sccm. Specified flow range is for an equivalent flow of nitrogen at 70┬°F (21┬°C) @ 760 mm Hg. 7-8 Weeks*
$3,212.00
DMF-41407 Digital mass flow controller, range 0-1 LPM. Specified flow range is for an equivalent flow of nitrogen at 70┬°F (21┬°C) @ 760 mm Hg. 7-8 Weeks*
$3,212.00
DMF-41408 Digital mass flow controller, range 0-2 LPM. Specified flow range is for an equivalent flow of nitrogen at 70┬°F (21┬°C) @ 760 mm Hg. 7-8 Weeks*
$3,212.00
DMF-41409 Digital mass flow controller, range 0-5 LPM. Specified flow range is for an equivalent flow of nitrogen at 70┬°F (21┬°C) @ 760 mm Hg. 7-8 Weeks*
$3,212.00
DMF-41431 Digital mass flow controller, range 0-30 LPM. Specified flow range is for an equivalent flow of nitrogen at 70┬°F (21┬°C) @ 760 mm Hg. 7-8 Weeks*
$3,212.00
DMF-41433 Digital mass flow controller, range 0-50 LPM. Specified flow range is for an equivalent flow of nitrogen at 70┬°F (21┬°C) @ 760 mm Hg. 7-8 Weeks*
$3,212.00
DMF-41842 Digital mass flow controller, range 0-100 LPM. Specified flow range is for an equivalent flow of nitrogen at 70┬°F (21┬°C) @ 760 mm Hg. 7-8 Weeks*
$3,642.00

Specifications

Service:
Clean gases compatible with wetted parts.
Wetted Materials:
316 SS, 416 SS, fluoroelastomer o-rings.
Accuracy:
±1% FS including linearity between 59 to 77°F (15 to 25°C) and 10 to 60 psia (0.7 to 4 bar); ±2% FS from 32 to 122°F (0 to 50°C) and 5 to 150 psia (0.3 to 10 bar).
Repeatability:
±0.15% of full scale.
Response Time:
0.6 to 1.0 second to within ±2% of setpoint over 20% to 100% FS.
Output:
Linear 0-5 VDC (2000 Ω min. load impedance); 0-10 VDC (4000 Ω min. load impedance).
Maximum Particulate Size:
100 microns.
Temperature Limits:
41 to 122°F (5 to 50°C).
Power Supply:
±15 VDC; 13.5 watts maximum.
Process Connections:
1/4" compression fitting for flow rates ≤50 L/m; 3/8" for flows ≥60 L/m.
Pressure Limits:
500 psig (34.5 bar).
Leak Integrity:
1 x 10-9 sccs of Helium.
Computer Interface:
RS-485.
Agency Approvals:
CE.

Product Literature

Manuals

Catalog Pages

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Model Description Availability* Price
DMF-110P 110 V power supply with 25-pin connector. 7-8 Weeks*
$563.00