Series GSTC Carbon Monoxide/Nitrogen Dioxide Gas Transmitter

High Accuracy Electrochemical Sensor, BACnet & MODBUS® Communication Protocol Compatible

The Series GSTC Carbon Monoxide/Nitrogen Dioxide Gas Transmitter monitors the gas concentration in underground parking garages and loading docks. The carbon monoxide transmitter is used to measure the exhaust of gasoline engines, while the nitrogen dioxide transmitter is used for diesel engines. The Series GSTC is compatible with either BACnet or Modbus® communication protocol, allowing the transmitter to be used with almost any building management controller. The GSTC output is communicated over an RS-485 wire via BACnet or Modbus® communication protocol. To maximize the accuracy of the Series GSTC, the sensor can be field-calibrated using the A-449 remote LCD display. When the sensor reaches the end of its life, the display will indicate that the sensor needs to be replaced. BACnet and Modbus® communication protocol recommend limiting the number of nodes in any segment to 32. Therefore, the transceiver may be rated at one unit load. Fractional loads are also acceptable. The Series GSTC accounts as an eighth of a load on the MS/TP network.

FACTORY CALIBRATED choices are available under "Filter By" on the Ordering tab.

Product Applications

Parking Garages
Loading Docks
Mechanical Room Monitoring

Starting at $250.75

Ordering

Filter By

Duct Mount

Factory Calibrated

Wall Mount

Grouped product items
Model	Description	Availability*	Price
GSTC-C	Carbon Monoxide Transmitter with BACnet & Modbus Communication	1-3 days*	$250.75
GSTC-C-D	Carbon Monoxide Duct Mount Transmitter with BACnet & Modbus Communication	1-2 Weeks*	$319.50
GSTC-C-D-FC	Carbon monoxide duct mount transmitter with BACnet & Modbus® communication, includes factory calibration certificate	1-2 Weeks*	$355.70
GSTC-C-FC	Carbon monoxide transmitter with BACnet & Modbus® communication, includes factory calibration certificate	1-2 Weeks*	$294.30
GSTC-C-LCD	Carbon Monoxide Transmitter with BACnet & Modbus Communication with Integral LCD Display	1-2 Weeks*	$313.70
GSTC-C-LCD-FC	Carbon monoxide transmitter with BACnet & Modbus® communication, LCD display, includes factory calibration certificate	1-2 Weeks*	$355.70
GSTC-N	Nitrogen Dioxide Transmitter with BACnet & Modbus Communication	1-2 Weeks*	$441.70
GSTC-N-D	Nitrogen Dioxide Duct Mount Transmitter with BACnet & Modbus Communication	1-2 Weeks*	$508.55
GSTC-N-D-FC	Nitrogen Dioxide duct mount transmitter with BACnet & Modbus® communication, includes factory calibration certificate	1-2 Weeks*	$547.05
GSTC-N-FC	Nitrogen Dioxide transmitter with BACnet & Modbus® communication, includes factory calibration certificate	1-2 Weeks*	$483.60
GSTC-N-LCD	Nitrogen Dioxide Transmitter with BACnet & Modbus Communication with Integral LCD Display	1-2 Weeks*	$504.65
GSTC-N-LCD-FC	Nitrogen Dioxide duct mount transmitter with BACnet & Modbus® communication, LCD display, includes factory calibration certificate	1-2 Weeks*	$547.05

Specifications

Sensor:: Field replaceable electrochemical, 2 years typical lifespan.
Range:: CO: 0 to 500 PPM, NO2: 10 PPM.
Output Drift:: <5% per year in air.
Coverage Area:: 5000 to 7500 sq ft typical.
Accuracy:: CO: 2% FS, NO2: 3% FS, at the time of calibration.
Resolution:: CO: 1 PPM; NO2: 0.1 PPM.
Temperature Limits:: -4 to 122°F (-20 to 50°C).
Storage Temperature:: For best sensor life, 32 to 68°F (0 to 20°C).
Humidity Limits:: 15 to 90% RH constant; 0 to 99% RH intermittent.
Response Time:: <45 s to 90% CO, <25 s to 90% NO2.
Span and Zero Adjustment:: Via pushbutton, using optional A-449 display. Zero only via BACnet or MODBUS® communication protocol.
Housing:: UV resistant glass filled polycarbonate.
Output Signals:: BACnet MS/TP, MODBUS® RTU, or MODBUS® ASCII (switch selectable) communication protocol.
Power Requirements:: 10-36 VDC or isolated 21.6-33 VAC, 5.7 mA @ 24 VDC.
Electrical Connection:: Removable terminal block, knock outs for conduit fitting.
Calibration:: Via pushbuttons using A-449 auxiliary display. Span gas concentration is field selectable.
Enclosure Rating:: IP64.
Weight:: 1 lb (0.45 kg).
Compliance:: CE.

Features

Industrial grade replaceable CO or NO2 sensors
Field selectable BACnet or Modbus® communication on GSTC models
Integral LCD display option
Service display tool for set-up and calibration of models without a LCD

Support Library

Product Literature

Manuals

Instruction Manual

Catalog Pages

Series GSTC Catalog Page

Product Data Sheet

GSTC

SlideShare

Approvals

Videos

Reviews

Write Your Own Review

Only registered users can write reviews. Please Sign in or create an account

Accessories

Model	Description	Availability*	Price
A-507	Gas calibration kit adaptor.	1-3 days*	$81.50
A-449	Remote display with mini USB display	1-3 days*	$68.60
A-506	Replacement Nitrogen Dioxide Sensor for GSTA & GSTC Series	1-2 Weeks*	$218.80
A-GSTA-SE	Security enclosure.	1-3 days*	$18.65
A-505	Replacement carbon monoxide sensor for the Series GSTA, GSTC, & CMT200	1-2 Weeks*	$81.50