Series 2600 Temperature/Process Controller
Series 2600 Temperature/Process Controllers set a new standard for quality, versatility, ease-of-use and value. While they include a high level of standard features, many function setup items appear in the control menu only when the function is selected, so you don’t have to wade through unnecessary items. Units feature a universal input for thermocouple types J, K, E, T, L, N, B, C, S & R; RTDs 100Ω Plt. NIST, 100Ω Plt. DIN, 120Ω Ni Industrial, 1000Ω Plt. DIN; differential input (-10 to +10 mV DC)and process input (0 to 20 mA DC, 0 to 10 VDC). A standard 24 Volt isolated, regulated power supply is included to operate most standard 4-20 mA transmitters.
Standard features include Self-Tune, Fuzzy Logic, fully adjustable PID, Auto/Manual control with bumpless transfer and front panel activation key, percent output indication, peak and valley indication, loop break protection and indication. For process inputs, the display is fully programmable from -1999 to +9999 with selectable decimal point location. Most thermocouple and RTD inputs can show whole or tenth degree displays. The Series 2600 is available with single or dual setpoint outputs and can be programmed for on-off, PID or heat/cool or latching alarm. All outputs are isolated from the inputs. Outputs include 10 Amp relay and 0-20 mA DC (scalable).
Questions
- Question
- In the Series 16A the option 936 = Set Point/Process Signal Output 0-10 VDC My Question Is "What Is This Option Used For"?
- Answer
- The -936 option on the 16A is most commonly used to remotely monitor a process (for instance, in a different room). An additional panel meter with a 0-10 volt input will allow you to do this. It can also be used as an input to another controller that runs a different system (off of the same process transmitter, for instance).
| Model | Description | Availability* | Price | |
|---|---|---|---|---|
| A-600 | R/C snubber (recommended for inductive loads like a solenoid or contactor) | 1-3 days* |
$25.75 |
|
| A-900 | Weatherproof enclosure, type 4X, control direct panel mounts in the front of the enclosure. | 1-3 days* |
$191.95 |
|
| A-901 | Weatherproof enclosure, type 4X, clear plastic window with rear panel for mounting the control inside the enclosure. | 1-3 days* |
$356.05 |
|
| A-TC-J25-FB | J type, 25' on spool, fiber glass insulation, 450°C, black outer sheath, 24 AWG, 0.20 SQMM | 1-2 Weeks* |
$25.75 |
|
| A-TC-J25-FEP | J type, 25' on spool, FEP insulation, 200°C, black outer sheath, 24 AWG, 0.20 SQMM | 1-2 Weeks* |
$21.30 |
|
| A-TC-J50-FB | J type, 50' on spool, fiber glass insulation, 450°C, black outer sheath, 24 AWG, 0.20 SQMM | 1-2 Weeks* |
$35.75 |
|
| A-TC-J50-FEP | J type, 50’ on spool, FEP insulation, 200°C, black outer sheath, 24 AWG, 0.20 SQMM | 1-2 Weeks* |
$28.10 |
|
| A-TC-J100-FB | J type, 100' on spool, fiber glass insulation, 450°C, black outer sheath, 24 AWG, 0.20 SQMM | 1-2 Weeks* |
$55.20 |
|
| A-TC-J100-FEP | J type, 100’ on spool, FEP insulation, 200°C, black outer sheath, 24 AWG, 0.20 SQMM | 1-2 Weeks* |
$41.55 |
|
| A-TC-K25-FB | K type, 25' on spool, fiber glass insulation, 450°C, yellow outer sheath, 24 AWG, 0.20 SQMM | 1-2 Weeks* |
$33.90 |
|
| A-TC-K25-FEP | K type, 25' on spool, FEP insulation, 200°C, yellow outer sheath, 24 AWG, 0.20 SQMM | 1-2 Weeks* |
$31.25 |
|
| A-TC-K50-FB | K type, 50' on spool, fiber glass insulation, 450°C, yellow outer sheath, 24 AWG, 0.20 SQMM | 1-2 Weeks* |
$53.05 |
|
| A-TC-K50-FEP | K type, 50' on spool, FEP insulation, 200°C, yellow outer sheath, 24 AWG, 0.20 SQMM | 1-2 Weeks* |
$45.75 |
|
| A-TC-K100-FB | K type, 100' on spool, fiber glass insulation, 450°C, yellow outer sheath, 24 AWG, 0.20 SQMM | 1-2 Weeks* |
$89.25 |
|
| A-TC-K100-FEP | K type, 100' on spool, FEP insulation, 200°C, yellow outer sheath, 24 AWG, 0.20 SQMM | 1-2 Weeks* |
$78.80 |
|
| MN-1 | Mini-Node™ RS-485 to USB converter | 1-3 days* |
$108.35 |
