Series WE07 2-Piece Flanged Stainless Steel V-Ball Valve
The Series WE07 incorporates a V-port
ball valve for impressive flow rates with
minimal pressure drop. Quarter turn
control ball valves are compact, lighter
weight and much less expensive than
comparable sized globe valves and
segmented control valves. They also offer
bubble tight shut off with zero leakage and
can withstand high pressure drops. The 60°
and 90° balls offer an equal percentage flow
characteristic. W. E. Anderson’s V-port ball
valves have been designed to offer
maximum flow characteristics that are
substantially higher than comparably sized
globe valves. The natural flow pattern of
ball valves increases flow rates and in many
applications valves smaller than pipeline
size can be used.
Actuators are direct mounted creating a
compact assembly for tight spaces. Limit
switches can be mounted directly to the
valves allowing for remote position
indication.
The Series WE07 can be configured with
an electric or pneumatic actuator. Electric
actuators are available in weatherproof or
explosion-proof, a variety of supply voltages
and Two-position modulating control.
Two-position actuators use the supply
voltage to drive the valve open or close,
while the modulating actuator accepts a 4 to
20 mA input for valve positioning.
Actuators feature thermal overload
protection and a permanently lubricated
gear train.
The pneumatic double acting actuator uses
an air supply to drive the valve open and
closed. The actuator has two supply ports
with one driving the valve open and the
other driving the valve closed. Spring
return pneumatic actuators use the air
supply to open the valve and internally
loaded springs return the valve to the closed
position. Also available is the SV3 solenoid
valve to electrically switch the air supply
pressure between the air supply ports for
opening and closing the valve. Actuators are
constructed of anodized and epoxy coated
aluminum for years of corrosion free
service.
Product Applications
- Gas or liquid flow control
Specifications
- VALVE
- Service:
- Compatible liquids and gases.
- Body:
- 2-piece.
- Line Sizes:
- 1/2 to 3".
- End Connections:
- 150# ANSI flange.
- Pressure Limits:
- 20" Hg to 275 psi (-0.7 to 19 bar).
- Wetted Materials:
- Body and ball: 316 SS (CF8M); Stem: 316 SS; Seat: RTFE/PTFE; Seal, Washer, and Packing: PTFE.
- Temperature Limits:
- -20 to 392°F (-29 to 200°C).
- Other Materials:
- O-ring: Fluoroelastomer; Handle: 304 SS; Washer: 301 SS; Stem Nut, Locking Device, Gland Ring: 304 SS; Handle Sleeve: PVC.
- Agency Approvals:
- Meets the technical requirements of EU Directive 2011/65/ EU (RoHS II).
- ACTUATORS
- Pneumatic “DA” and “SR” Series
- Type:
- DA series is double acting and SR series is spring return (rack and pinion).
- Normal Supply Pressure:
- DA: 40 to 115 psi (2.7 to 7.9 bar); SR: 80 psi (5.5 bar).
- Maximum Supply Pressure:
- 120 psi (8.6 bar).
- Air Connections:
- DA01: 1/8" female NPT; DA02 to DA04: 1/4" female NPT; SR02 to SR06: 1/4" female NPT.
- Housing Material:
- Anodized aluminum body and epoxy coated aluminum end caps.
- Temperature Limits:
- -40 to 176°F (-40 to 80°C).
- Accessory Mounting:
- NAMUR standard.
- Electric “TD” and “MD” Series
- Power Requirements:
- 110 VAC, 220 VAC, 24 VAC or 24 VDC (MD models not available in 24 VDC).
- Power Consumption:
- See instruction manual.
- Cycle Time (per 90°):
- TD01: 4 s; MD01: 10 s; TD02 and MD02: 20 s; TD03 and MD03: 30 s.
- Duty Rating:
- 85%.
- Enclosure Rating:
- NEMA 4X (IP67).
- Housing Material:
- Powder coated aluminum.
- Temperature Limits:
- -22 to 140°F (-30 to 60°C).
- Electrical Connection:
- 1/2" female NPT.
- Modulating Input:
- 4 to 20 mA.
- Standard Features:
- Manual override,
position indicator, and TD models come
with two limit switches.
- Electric “TI” and “MI” Series
- Power Requirements:
- 110 VAC, 220 VAC, 24 VAC or 24 VDC.
- Power Consumption:
- See instruction manual.
- Cycle Time (per 90°):
- See instruction manual.
- Duty Rating:
- See instruction manual.
- Enclosure Rating:
- NEMA 7, designed to meet hazardous locations: Class I, Group C & D; Class II, Group E, F & G; Division I & II.
- Housing Material:
- Powder coated aluminum.
- Temperature Limits:
- -40 to 140°F (-40 to 60°C).
- Electrical Connection:
- 1/2" female NPT.
- Modulating Input:
- 4 to 20 mA.
- Standard Features:
- Position indicator and two limit switches.
Features
- The 60° and 90° balls offer an equal percentage flow characteristic
- Bubble tight shut off at high pressure drops
- Limit switches can be mounted to manual valves for remote monitoring
- Available with a variety of electric and pneumatic actuators
Product Literature
Manuals
Catalog Pages
Product Data Sheet
Model Chart
WE07-X-X-XXX WE07 PNEUMATIC 2-PIECE 150# FLANGED END SST V-BALL VALVE
1ST SYMBOL (1ST X) RANGE
CHD00 1/2 IN HAND OPERATED
DHD00 3/4 IN HAND OPERATED
EHD00 1 IN HAND OPERATED
GHD00 1-1/2 IN HAND OPERATED
HHD00 2 IN HAND OPERATED
IHD00 2-1/2 IN HAND OPERATED
JHD00 3 IN HAND OPERATED
CDA01 1/2 IN DOUBLE ACTING
DDA01 3/4 IN DOUBLE ACTING
EDA03 1 IN DOUBLE ACTING
GDA03 1-1/2 IN DOUBLE ACTING
HDA03 2 INDOUBLE ACTING
IDA04 2-1/2 IN DOUBLE ACTING
JDA04 3 IN DOUBLE ACTING
CSR02 1/2 IN SPRING RETURN
DSR02 3/4 IN SPRING RETURN
ESR03 1 IN SPRING RETURN
GSR04 1-1/2 IN SPRING RETURN
HSR05 2 IN SPRING RETURN
ISR06 2-1/2 IN SPRING RETURN
JSR06 3 IN SPRING RETURN
2ND SYMBOL (2ND X) SOLENOID (PNEUMATIC ACTUAOTR ONLY)
T 60 DEGREE V-BALL
N 90 DEGREE V-BALL
3RD SYMBOL (3RD X) SOLENOID (PNEUMATIC ACTUATOR ONLY)
N NO SOLENOID
A NEMA 4X NAMUR SOLENOID
4TH SYMBOL (4TH X) SOLENOID (PNEUMATIC ACTUATOR ONLY)
N NO SOLENOID
A 110 VAC
B 220 VAC
C 24 VAC
D 24 VDC
E 12 VDC
5TH SYMBOL (5TH X) POSITIONERS AND SWITCHES
00 NONE
01 42ADO EXP LIMIT SWITCH
02 45VDO EXP POSITION TRANSMITTER
03 42ADO-B ATEX LIMIT SWITCH
04 42ADO-IE IECEX LIMIT SWITCH
06 QV-210101 POLY LIMIT SWITCH
07 VPS AND P1 PROX SWITCH
08 265ER-D5 POSITIONER
09 285ER-D5 SMART POSITIONER
OPTIONS (OPT) (PNEUMATIC ACTUATORS ONLY)
-NO FAIL OPEN SPRING RETURN ACTUATOR
WE07-X-X-XXX WE07 ELECTRIC 2-PIECE 150# FLANGED END SST V-BALL VALVE
1ST SYMBOL (1ST X) RANGE
CTD01 1/2 IN ELECTRIC TWO-POSITION
DTD01 3/4 IN ELECTRIC TWO-POSITION
ETD01 1 IN ELECTRIC TWO-POSITION
GTD02 1-1/2 IN ELECTRIC TWO-POSITION
HTD02 2 IN ELECTRIC TWO-POSITION
ITD03 2-1/2 IN ELECTRIC TWO-POSITION
JTD03 3 IN ELECTRIC TWO-POSITION
CMD01 1/2 IN ELECTRIC MODULATING
DMD01 3/4 IN ELECTRIC MODULATING
EMD01 1 IN ELECTRIC MODULATING
GMD01 1-1/2 IN ELECTRIC MODULATING
HMD02 2 IN ELECTRIC MODULATING
IMD03 2-1/2 IN ELECTRIC MODULATING
JMD03 3 IN ELECTRIC MODULATING
CTI01 1/2 IN EXP ELECTRIC TWO-POSITION
DTI01 3/4 IN EXP ELECTRIC TWO-POSITION
ETI02 1 IN EXP ELECTRIC TWO-POSITION
GTI03 1-1/2 IN EXP ELECTRIC TWO-POSITION
HTI04 2 IN EXP ELECTRIC TWO-POSITION
ITI04 2-1/2 IN EXP ELECTRIC TWO-POSITION
JTI05 3 IN EXP ELECTRIC TWO-POSITION
CMI01 1/2 IN EXP ELECTRIC MODULATING
DMI01 3/4 IN EXP ELECTRIC MODULATING
EMI02 1 IN EXP ELECTRIC MODULATING
GMI03 1-1/2 IN EXP ELECTRIC MODULATING
HMI04 2 IN EXP ELECTRIC MODULATING
IMI04 2-1/2 IN EXP ELECTRIC MODULATING
JMI05 3 IN EXP ELECTRIC MODULATING
2ND SYMBOL (2ND X) SOLENOID (PNEUMATIC ACTUAOTR ONLY)
T 60 DEGREE V-BALL
N 90 DEGREE V-BALL
3RD SYMBOL (3RD X) ACTUATOR VOLTAGE (ELECTRIC ACTUATORS)
NO SYMBOL FOR ELECTRIC ACTUATORS
N NO SOLENOID
A 110 VAC
B 220 VAC
C 24 VAC
D 24 VDC| Model | Description | Availability* | Price | |
|---|---|---|---|---|
| VB-01 | Volume booster, 1.02 Cv, 1/4" NPT in/out connection, aluminum | 12-13 Weeks* |
$500.95 |
