Series SAH SMART Air Hood® Balancing Instrument
Quad Flow Design Technology, Predictive Balancing
AVAILABLE with SAH-22HC HARD TRAVEL CASE!
The SMART AIR HOOD® (SAH) Balancing Instrument is the most accurate and easy to operate air flow hood on the market today. The low profile design allows balancers to work in occupied spaces (bathroom stalls, MRI machines, cubicles, tables/chairs, etc.) and maneuver through doorways easier. By using the included 12 foot hood pole and wireless communications to a mobile device, one operator can balance a branch in less time than traditional balancing teams. Besides being lighter than most traditional capture hoods, the ergonomic design makes the technician exude less energy as the SAH has a lighter, balanced design. The rugged polypropylene base hood features Quad Flow Design Technology for controlling air flow and minimizing back pressure, which yields superior measurement accuracy. The Wi-Fi protocol back to the user’s Android® or iOS® device gives the user real-time feedback, as they may be up to 200 yards (183 m) from the hood which saves the technician from unnecessarily going up and down their ladder multiple times to cut or open the dampers to balance the system.
The SMART AIR HOOD® Application Software reduces the number of steps in the air flow balancing process using Predictive Balancing. Predictive Balancing is a method of predicting the optimal flow set point for each register and the order in which they should be adjusted.
INCLUDED WITH THE SAH KITS:
For Fast and Accurate Calibration Services, CLICK HERE!
Product Applications
- Commissioning, testing, adjusting and balancing volumetric air flow from diffusers, grilles, and registers in HVAC systems
Starting at $4,296.50
Specifications
- Service:
- Air.
- Units:
- Cubic feet per minute (CFM), cubic meter per hour (M³/H), cubic meter per second (M³/S), liter per minute (l/min), liter per hour (l/hour), liter per second (l/s).
- Volume Flow Ranges:
- Supply: 40 to 2000 CFM (68 to 3398 m3/h) (19 to 944 l/s); Exhaust: 80 to 2000 CFM (136 to 3398 m3/h) (38 to 944 l/s).
- Accuracy > 40 CFM:
- ±3% of reading ±7 CFM (11.9 m3/hr) (3.3 l/s).
- Resolution:
- 1 CFM (1.7 m³/h) (.5 l/s).
- Power Requirements:
- 3.6 V NCR18650B MH12210 Li-ion rechargable battery (included), or (4) AA alkaline 1.5 V batteries (not included).
- Housing Material:
- Polypropylene.
- Weight of Hood:
- 5.75 lb (2.6 kg).
- Supported Devices:
- UHH6 and newer, and smart devices with Android® firmware version 8.0 and above or iOS® version 14.1 and above.
- Software:
- SMART Air Hood® application software, available on the Google Play™ store and the Apple App Store®.
- Wireless Protocol:
- Wi-Fi wireless technology.
- Response Time:
- 1 s.
- Compliance:
- CE, FCC, IC, RCM (-AU model only).
Features
- Patent pending Quad Flow Design Technology directs the circulating air patterns to provide a more even air flow that minimizes backpressure enabling accurate readings.
- Patent pending Predictive Balancing is a process that guides the balancing technician on setting the optimal flow set point for each sequential terminal. With the PredictAir™ SAH application software, the balancing process takes much less time than traditional air balancing methods.
- The ergonomic design is ¼ of the height of a traditional legacy flow hood, and is much lighter and easier to work with than the existing bulky air hoods, providing greater maneuverability and less physical strain.
- One technician can complete air balancing by themselves.
- Wi-Fi wireless communication provides a range up to 200 yards, and provides a more stable connection in environments with steel and concrete than Bluetooth® communication.
- The iOS® version of the SAH software has the capability to drag and drop into third party software in split-screen mode.
- When plugging in directly to a mobile device to the SAH, the Wi-Fi radio is deactivated.
- The hardcase (included with SAH-22HC) gives users the ability to plug in all the instruments inside the case and then externally run a cord to the case so they can charge all instruments with one cord (extension cord not included).
- For linear diffusers (1´x4´) and HEPA filters (2´x4´), optional hoods are available that are designed to be installed quickly onto the standard 2x2 low profile design.
Options
- -IN Less lithium battery (for international shipments only)
Product Literature
Manuals
- SMART AIR HOOD® Instruction Manual
- SMART AIR HOOD® Quick Start Guide
- Adapter Hood Manual
- Firmware Update Manual
- Calibration Return Pack
- Android® Software Manual
- iOS® Software Manual
- Low Flow Plug Manual
Catalog Pages
Product Data Sheet
SlideShare
Questions
- Question
- What is Quad Flow?
- Answer
- Traditional industry cone shaped air flow hoods experience two main problems when measuring flow registers; poor accuracy of flow readings and back pressure compensation. These factors contribute to wasted energy and poor performance. Dwyer’s patent pending, state of the art, Quad Flow Design concept is based on controlling the recirculating air patterns that can create back pressure effects, while mixing the flow more evenly and efficiently. This well mixed flow for velocity sampling leads to superior measurement accuracy.
- Question
- Where do I go for help on how to use the SMART Air Hood®?
- Answer
- The Dwyer website is an excellent source for product information. Videos are available illustrating the SMART Air Hood® features and benefits as well as how to use for balancing. In addition to the Dwyer website, the Dwyer Technical Support Team is available to take your phone calls and assist with questions. Please visit dwyer-inst.com for contact information and technical support on the SMART Air Hood®.
- Question
- What type of battery is in the SMART Air Hood®?
- Answer
- The SMART Air Hood® operates with a NCR 18650B MH12210 lithium ion rechargeable battery, 3.6v. In addition, 4 AA batteries can be used as backup so the SMART Air Hood® is always available for use.
- Question
- Can the SMART Air Hood® accommodate various size diffusers?
- Answer
- Yes, they are available (1’x4’, 1’x5’, 2’x4’, 3’x3’, & 4’x4’) as accessories for the SAH. Consult the Dwyer Instruments website, dwyer-inst.com for details.
- Question
- Can I store my results for future reference?
- Answer
- Yes, the SMART Air Hood® mobile meter includes job based logging that will track the entire balancing process from beginning to end including a balance summary that shows the actual final flow at each register and the deviation from target. Each branch is considered a job. All of the registers for a job can be setup ahead of time and distributed prior to performing the balance. Setup and modifications to the setup can also be done onsite. Jobs can be paused and resumed allowing for additional activities, breaks, maintenance, without disrupting the balancing process.
- Question
- What is the range of the SAH wireless connection?
- Answer
- The SAH uses Wi-Fi for communications. There is no need for additional equipment needed, like a router. The range is up to 200 yards.
- Question
- Can it be shipped as air freight to the job?
- Answer
- Yes. The SMART Air Hood® is shipped with a protective carrying case durable enough to be shipped air freight. Please note that there are shipping restrictions for lithium batteries; consult your carrier prior to shipping.
- Question
- How much does it weigh and what are the dimensions?
- Answer
- Dwyer’s SMART Air Hood® is a revolutionary crate design made from a rugged polymer construction. The lightweight design represents the smallest and most aerodynamic design the industry has ever seen. The SMART Air Hood® weighs less than 6 pounds and ¼ the height of current industry air hoods at 24"x24"x12".
- Question
- Is a protective case provided for the SMART Air Hood®?
- Answer
- Yes, the SMART Air Hood® is shipped in a protective travel case as standard. The price is included, there is no extra charge.
- Question
- What is the warranty?
- Answer
- The SMART Air Hood® has a 1 year warranty.
- Question
- Where do I send the SMART Air Hood® to be calibrated?
- Answer
- Recalibration of the SMART Air Hood® is fast and easy. Dwyer recommends recalibrating the Hood, at a minimum, once a year to ensure maximum performance. When it is time for recalibration, simply detach, by unclipping the clamps on all four sides, the four Quad Flow Sensing Grids along with the Sensor Module. The Quad Flow Sensing Grids and Sensor Module need to be calibrated together. For your convenience, Dwyer includes with each purchase of a SMART Air Hood® a custom return calibration package specifically designed for the four Quad Flow Sensing Grids and Sensor Module. To ensure no downtime, you can purchase a new set of four calibrated Quad Flow Sensing Grids and Sensor Module, model A-SAH-CK part number 100765-09, ready to install on the jobsite. You can return the original four Quad Flow Sensing Grids and Sensor Module in the custom return package to Dwyer using our RMA process or to any authorized Dwyer calibration service company. Once The Quad Flow Sensing Grids and Sensor Module are calibrated, they will be returned as a set back to you, ready to install on your SMART Air Hood®.
- Question
- What is Predictive Balancing?
- Answer
- The current industry method of balancing is commonly referred to as proportional balancing. Proportional balancing determines the flow between each terminal and the key. The key flow changes with each adjustment of any given terminal, so the balancing technician must estimate a flow for the terminal and adjust the key and the terminal until the correct proportion is achieved. The SMART Air Hood® is designed to provide Predictive Balancing, an industry first for air flow balancing. Predictive balancing guides the balancing technician on where to go to set the proper flow for each register allowing the system to be fully optimized. The SMART Air Hood® Balancing Instrument Application Software which reduces the number of steps in the air flow balancing process using Predictive Balancing’s Express Balance mode. Predictive Balancing is a method of predicting the optimal flow set point for each register and the order in which they should be adjusted.
- Question
- Why should I buy a SMART Air Hood®?
- Answer
- The SMART Air Hood® Balancing Instrument is the most accurate and easy to operate air flow hood on the market. By using either included hood pole and wireless communications to a handheld, a single operator can balance a branch in less time than traditional balancing teams. Besides being lighter than most traditional capture hoods, the ergonomic design makes the SAH easy to maneuver, with less physical stress. The rugged polypropylene base hood features patented Quad Flow Design Technology for controlling air flow and minimizing back pressure, which yields superior measurement accuracy. The Wi-Fi communication gives reliable communication with a distance of up to 200 yards.
Write Your Own Review
| Model | Description | Availability* | Price |
|---|